1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 25
1 TROUBLESHOOTING FOR THE HARDWARE
22
When the Saddle Stitch Finisher and the Inserter are installed together, close the lower
cover of the Inserter.
23
When the Saddle Stitch Finisher is installed, open its
lower front cover.
24
Turn the right-hand green dial counterclockwise until
it stops.
25
Turn the left-hand green dial clockwise while pushing
it.
26
Remove the misfed paper from the paper exit section
of the saddle stitch unit.
27
Open the paper exit cover of the saddle stitch unit.
To Next Page
Loading...
