1 TROUBLESHOOTING FOR THE HARDWARE
Clearing a Staple Jam 35
Clearing a Staple Jam
When a staple jam has occurred in the stapler of the finisher or saddle stitch unit, clear the jam following the
procedure below.
P.35 “Staple jam in the Finisher MJ-1027 / Saddle Stitch Finisher MJ-1028”
P.36 “Staple jam in the Saddle Stitch Finisher MJ-1029”
P.38 “Staple jam in the saddle stitch unit”
Staple jam in the Finisher MJ-1027 / Saddle Stitch Finisher MJ-1028
1
Open the front cover of the finisher.
2
Lower the lever of the stapler to release the lock, and
then take out the staple cartridge.
3
Lower the guide while holding the knob.
Do not touch the stapling area.
The actual needle point could cause you personal injury.
4
Remove all jammed staples with something sharp.
To Next Page
Loading...
