Setting up from TopAccess 159
Setting up Copier Settings
In the Copier submenu page in the Setup menu, an administrator can configure the copier set-
tings that initially apply to copy operations.
Some settings may not apply to the Touch Panel Display as soon as you save the settings. The
settings will be updated by pressing the [FUNCTION CLEAR] button on the Control Panel or
after an Auto Clear time period.
Setting the copier settings
1
Access TopAccess in the administrator mode.
P.114 “Accessing TopAccess Administrator Mode”
2
Click the Setup menu and Copier submenu.
y The Copier submenu page is displayed.
3
In the Copier submenu page, set the copier settings as required.
y To set the Copier Settings, see the following:
P.160 “Setting up the Copier Settings”
4
Click [Save].
y The confirmation dialog box appears.
If you want to restore the current settings without saving the changes, click [Cancel].
Clicking [Cancel] cannot restore the defaults. This can only clear the changes and
restore the current settings before saving the changes.
To Next Page
Loading...
