7 TopAccess Administrator Mode
260 Setting up User Management
y Department Code Enforcement
Select whether invalid jobs, which a department code is not specified or invalid
department code is specified, are printed or stored in the invalid job list when the
department code is enabled.
ON — Select this to not print the invalid jobs and store them in the invalid job list.
Print
— Select this to print the invalid jobs.
Delete — Select this to delete the invalid jobs without storing them in the invalid job list.
yIf the Department Code Enforcement is set to ON and the SNMP communication is
enabled in the printer driver, the user will be prompted to enter the correct department
code if an invalid department code was entered in the printer driver.
yThe Department Code Enforcement setting is not applied when the User Management
Setting is enabled.
To Next Page
Loading...
