2.SENDING A FAX
Basic Procedure 9
2 SENDING A FAX
5
Click [OK].
The transmission settings are determined and the N/W-Fax driver properties dialog box is closed.
6
Click [Print] in the print dialog box on the application software.
A fax starts being sent.
y Note that the command name to print a document (send a fax) may differ from [Print] depending on the
application software.
y A waiting fax job can be checked or deleted through the managing jobs function in TopAccess. A sent fax
job can also be checked through the displaying job logs function in TopAccess. For details, refer to the
TopAccess Guide.
To Next Page
Loading...
