Paper Size Setting 125
Paper Size Setting
This section describes how to set the paper size placed in the drawer or on the bypass tray.
1
Press the [USER FUNCTIONS] button.
The “user functions mode” main screen is displayed.
2
Select “DEFAULT SETTINGS” with and buttons, and then
press the [ENTER] button.
3
Select “GENERAL SETTING” with and buttons, and then
press the [ENTER] button.
4
Select “DRAWER SIZE” with and buttons, and then press
the [ENTER] button.
USER FUNCTIONS
1216
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
DEFAULT SETTINGS
01.GENERAL SETTING
02.COPY SETUP
03.FAX SETUP
GENERAL SETTING
01.DRAWER SIZE
02.WALKUP SCREEN
03.TIMERS
To Next Page
Loading...
