Toshiba e-STUDIO195 - Energy Saving Mode Setting

5 CHANGING EQUIPMENT’S SETTINGS
134 Energy Saving Mode Setting
Energy Saving Mode Setting
You can select the sleep mode or super sleep mode to enable the energy saving mode.
1
Press the [USER FUNCTIONS] button.
The “user functions mode” main screen is displayed.
2
Select “DEFAULT SETTINGS” with and buttons, and then
press the [ENTER] button.
3
Select “GENERAL SETTING” with and buttons, and then
press the [ENTER] button.
4
Select “ENERGY SAVING MODE” with and buttons, and
then press the [ENTER] button.
USER FUNCTIONS 1216
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
DEFAULT SETTINGS
01.GENERAL SETTING
02.COPY SETUP
03.FAX SETUP
GENERAL SETTING
02.DEPARTMENT CODE
03.FAX DRAWER SETTING
04.ENERGY SAVING MODE