SETUP FLOW FOR PRINTING FEATURES 45
Setup Flow for USB Printing
This equipment can be used as printer connected with a USB cable. When it is connected with a
USB cable, it does not require an initial setup. After you connect this equipment and your com-
puter, install the printer drivers and then it provides USB printing features.
USB printing is not available for Windows NT4.0 and Windows 98.
* It is only applicable for e-STUDIO520/600/720/850, e-STUDIO523/603/723/853 and e-STUDIO 281c/
351c/451c.
Setup Flow Description/Reference
Connect this equipment Connect the machine and your computer with a USB or Parallel* cable.
Reference: QUICK START GUIDE
y Chapter 4 “CONNECTING TO THE DEVICE”
“1.CONNECTING TO THE USB PORT”
Install the Client Software Install the printer driver from the Client Utilities CD-ROM.
Reference: Printing Guide
y Chapter 2 “INSTALLING CLIENT SOFTWARE FOR WINDOWS”
“Installing the Client Software for USB Printing”
Configuring the Printer
Drivers
Configure the options and department code.
Reference: Printing Guide
y Chapter 5 “PRINTING FROM WINDOWS”
“Before Using the Printer Driver”
Windows 98
Windows Me
Windows 2000
Windows XP
Windows Vista
Windows Server 2003
Connecting with USB
Setting up the USB Printer
Connection
To Next Page
Loading...
