SETUP FLOW FOR PRINTING FEATURES 67
Setup Flow for E-mail Printing
E-mail printing allows users to print a file by sending the file as an E-mail message to this equip-
ment.
For e-STUDIO352/452, e-STUDIO353/453, e-STUDIO202L/232/282, e-STUDIO203L/233/283,
e-STUDIO520/600/720/850 and e-STUDIO523/603/723/853, the E-mail printing feature is avail-
able only when the Scanner Kit is installed, or when the Printer/Scanner Kit is installed.
This equipment allows you to print a file sent to it via E-mail. This equipment will receive the
message from the POP3 account in the E-mail server and print the file.
This equipment can print the TIFF files only.
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
y Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
y Chapter 4 “SETTING ITEMS (ADMIN)”
“3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the TCP/IP”
Connecting to Internet
Receive print file
from POP3 server
Internet
E-mail Server
To Next Page
Loading...
