Toshiba e-STUDIO233 - Setup Flow for Internet Fax

SETUP FLOW FOR FAX FEATURES 77
If you want to send an internet fax using the N/W-Fax driver, you must configure the equipment
to enable the Internet Fax transmission.
 P.77 “Setup Flow for Internet Fax”
Setup Flow for Internet Fax
The Internet Fax feature allows users to send originals, same as the fax features. However, the
Internet Fax is sent through the Internet, although the fax is sent through the public switched
telephone line. In order to send the Internet Fax, the remote device also must support the Inter-
net Fax feature.
y For e-STUDIO352/452, e-STUDIO353/453, e-STUDIO202L/232/282, e-STUDIO203L/233/
283, e-STUDIO520/600/720/850 and e-STUDIO523/603/723/853, the internet fax transmis-
sion is available only when the Scanner Kit is installed, or when the Printer/Scanner Kit is
installed.
y The color images cannot be sent by the Internet Fax. Same as the fax transmission, the orig-
inals will be converted to the black and white images when sending as an Internet Fax.
This equipment sends the internet faxes via a SMTP server and receives them from a POP3
server.
Set up the Save as file
Setting
An administrator should specify the Save as file destination and network
folder to enable the Save as file features on the N/W-Fax driver.
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Save as file Settings”
“Setting up the N/W-Fax Destination”
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Save as file Settings”
“Setting up the N/W-Fax Folder”
Install the Client Software Install the N/W-Fax driver from the Client Utilities CD-ROM.
Reference: Network Fax Guide
y Chapter 2 “INSTALLING CLIENT SOFTWARE”
“Installing Network Fax Software
Setup Flow Description/Reference
Ð
Ð

Ð
Ð

