5 SETUP FLOW
68 SETUP FLOW FOR PRINTING FEATURES
Set up the IPv6 Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE
y Chapter 4 “SETTING ITEMS (ADMIN)”
“3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv6)”
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the IPv6”
Set up the E-mail Server Configure the POP3 account for this equipment in the incoming mail server
and DNS Server to enable to receive E-mail print file from the Internet.
Reference: Network Administration Guide
y Chapter 1 “SETTING UP NETWORK SERVER”
“Setting up DNS and Mail Servers”
Set up the E-mail Setting Specifying the POP3 Network Servers settings using TopAccess.
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the POP3 Network Service”
Set up the Printing Ser-
vice
Enable the E-mail Printing Service using TopAccess.
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Print Service Settings”
“Setting up the E-mail Print”
Setup Flow Description/Reference
To Next Page
Loading...
