5 SETUP FLOW
60 SETUP FLOW FOR PRINTING FEATURES
Set up the IPv6 Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE
y Chapter 4 “SETTING ITEMS (ADMIN)”
“3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv6)”
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the IPv6”
Set up the DNS
(Optional)
If you want to print from the Internet, configure the DNS settings using
TopAccess to enable accessing to this equipment over the Internet. Also, if
the DNS server supports the Dynamic DNS, enable the DDNS as well.
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the DNS Session”
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
‘ “Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the DDNS Session”
Set up the Printing Ser-
vice
Enable the IPP Printing Service using TopAccess.
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Print Service Settings”
“Setting up the IPP Print”
Install the Client Software Install the Macintosh PPD file from the Client Utilities CD-ROM and creating
a printer.
Reference: Printing Guide
y Chapter 3 “INSTALLING CLIENT SOFTWARE FOR MACINTOSH”
“Installing the Printer on Mac OS X 10.2.4 to Mac OS X 10.4.x”
Setup Flow Description/Reference
To Next Page
Loading...
