5 SETUP FLOW
74 SETUP FLOW FOR SCANNING FEATURES
Set up the IPv6 Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE
y Chapter 4 “SETTING ITEMS (ADMIN)”
“3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv6)”
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the IPv6”
Install the Client Software Install the Remote Scan driver from the Client Utilities CD-ROM.
Reference: Scanning Guide
y Chapter 8 “REMOTE SCAN”
“Installing Remote Scan Driver”
Setup Flow Description/Reference
To Next Page
Loading...
