Table of Contents
© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
iii
3.10 To Prevent Dark Toner from Coming Off..................................................................... 3-87
3.11 To Register the Image Quality Adjusted Corresponding to a Preference
(To use the Custom Color Settings) ............................................................................ 3-88
3.12 To Print a Full-Color Original in Two Colors ................................................................ 3-91
3.12.1 To Adjust Colors .................................................................................................... 3-92
3.12.2 To Adjust the Sharpness ....................................................................................... 3-96
3.12.3 To Print a Full-Color Original in Two Colors.......................................................... 3-98
3.13 To Use ICC Profile....................................................................................................... 3-99
3.13.1 To Create ICC Profiles for Printing on the Paper to be Used .............................. 3-100
3.13.2 To Print Precise Colors Using Existing RGB Source ICC Profiles ...................... 3-105
3.13.3 To Perform Simulated Printing with CMYK Inks of Each Ink Manufacturer......... 3-109
3.13.4 To Print Using Custom RGB Profiles .................................................................. 3-113
3.13.5 To Convert Colors with Specified Source ICC Profiles (Not Using
Embedded ICC Profiles)...................................................................................... 3-117
3.13.6 To Perform Further Adjustment After Using ICC Profiles .................................... 3-122
3.14 To Improve the Reproducibility of Red Seal Color .................................................... 3-125
3.15 To Suppress the Unevenness and Jitteriness on Images,
White Voids in the Lines on Background and Around Text ....................................... 3-127
3.16 To Suppress Color Misalignment .............................................................................. 3-128
4. e-Filing-specific Adjustments
4.1 To Clearly Store a B/W Image in the Auto Color Mode ................................................. 4-1
4.2 To Store an Original while Reducing the File Size ........................................................ 4-3
4.3 To Match the Color Balance on the Original
(To adjust the color balance in Print to Box).................................................................. 4-5
4.4 To Scan and Print, while Minimizing Moiré.................................................................... 4-7
4.5 To Finely Print the Image Stored in the e-Filing box
(To print images stored through Copy to Box or Print to Box)....................................... 4-9
4.6 To Store an Image Suitable for Displaying on the Monitor or Image Editing............... 4-11
4.7 To Finely Print Color Images Scanned and Stored
(To print images stored through Scan to Box)............................................................. 4-13
4.8 Appendix...................................................................................................................... 4-16
5. Scanning-specific Adjustments
5.1 To Clearly Scan Text (To reduce noise around text)..................................................... 5-1
5.2 To Scan an Original, while Eliminating the Background Color
(To eliminate the background density) .......................................................................... 5-3
5.3 To Clearly Scan and Print an Original in Black and White
(To improve gradation and reduce graininess).............................................................. 5-5
5.4 To Scan the Original, while Reducing the File Size....................................................... 5-6
5.4.1 To Reduce the File Size by Changing the Options when Scanning the Original .... 5-7
5.4.2 To Reduce the File Size in Slim PDF .................................................................... 5-10
5.5 To Sharply Scan the Original (To increase the sharpness intensity)........................... 5-12
5.6 To Scan an Original, while Enhancing Black............................................................... 5-14
5.7 To Scan an Original with the Desired Gradation ......................................................... 5-16
5.8 To Register the Original Mode Optimal for a Particular Type of Original
(To have “Custom” selected) ....................................................................................... 5-18
5.9 To Eliminate Shading around Scanned Images .......................................................... 5-22
5.10 To Scan Yellow Clearly ............................................................................................... 5-23
5.11 To Reduce Streaks in Scanning with DF..................................................................... 5-25
5.12 To Change Judgment Area of [Omit Blank Page] and [Auto Color] (To make
judgment properly for originals whose images are only located near the edges)........ 5-27
5.13 To Make a Scan by Removing all Colors other than Black ......................................... 5-29
To Next Page
Loading...
