2.Copier-specific Adjustments
© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
2-43
2.9 To Eliminate Moiré
Explanation
When an original containing photo images or gradational images (halftones) is copied, moiré sometimes
occurs on the copy. Perform adjustment regarding image processing (sharpness intensity), in order to
obtain a clear copy image, while eliminating moiré.
Procedures
• You can start with any of the procedures. But it is recommended to perform the procedures in order, as
listed below. You can perform one procedure in conjunction with another. But if this changes the image
quality more than required or loses the effectiveness of the adjustment, restore the settings made in
the previously performed procedure to the original ones. Then perform other procedures.
• Both the service technician and the user can perform procedures (1) and (2).
• Only the service technician must perform procedure (3).
Before adjustment After adjustment
Moiré occurs on the photo image.
Moiré is eliminated and a clear copy image
is obtained.
To Next Page
Loading...
