Toshiba e-STUDIO3015AC - To Maintain a Uniform Gray Hue (to Maintain Consistency in Gray Among Text, Photos and Graphics)

3.Printer-specific Adjustments
© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
3-47
3.4.3 To Maintain a Uniform Gray Hue
(To maintain Consistency in Gray among Text, Photos and Graphics)
 Explanation
For printing, only the K toner is usually used to reproduce gray areas of drawing data, lines and text. On
the other hand, all color toners (C, M, Y and K) are used to reproduce gray areas of image data, such as
BMP, GIF, JPEG and TIFF. This provides a deeper gray on the printouts. Change the option on the
printer driver, in order to maintain consistency in the gray hue between the drawing data and the image
data.
 Procedures
Both the service technician and the user can perform all adjustments.
Before adjustment After adjustment
How gray is reproduced varies depending
on the type of original. As a result, there
are variations in gray.
All color toners are used to reproduce
gray. As a result, consistency is
maintained in the gray hue.
Photo area
Tex t a r e a
Photo area
Tex t ar ea