Toshiba e-STUDIO3015AC - To Adjust User Custom Mode Settings in Full Color Mode

2.Copier-specific Adjustments
© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
2-83
2.19.2 To Adjust User Custom Mode Settings in Full Color Mode
• Perform the adjustment in accordance with the procedures below.
• Only the service technician must perform procedures (1) and (2).
• Both the service technician and the user can perform procedure (3).
(1) Select [08 SETTING MODE]. Change the value for the code [7614] to enable the functions of the
User Custom mode in the full color mode.
• The default adjustment value for the User Custom mode is preset at the one that reproduces the
image quality equivalent to that of Text/Photo in the full color mode at the time of shipment.
After setting the value, perform the next procedure.
Value for 08-7614 User mode for full color mode
0Unused
1 Used (Text/Photo base)
2 Used (Text base)
3 Used (Printed Image base)
4 Used (Photo base)
5 Used (Map base)