Toshiba e-STUDIO3015AC - Page 141

2.Copier-specific Adjustments
© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
2-87
After setting the value, perform the next procedure.
(3) In the normal mode, select [User Custom] in Original Mode on the control panel.
 Cautions after the adjustment
Nothing in particular
Full
color
05-7841 -
Text / P hot o
reproduction
level
adjustment
0 to 9 0
1 to 4: Photo-oriented
0, 5: Default
6 to 9: Text-oriented
* Text is blurred if the value
is too small. Noise
increases in the photo area
if the value is too large.
2.11
05-7843 3
Reproducibility
adjustment of
the black text,
the color text
and the gray
print pattern
0 to 1 0
0: Black text priority
1: Color text and gray print
pattern priority
2.27
05-7980 0/1/2
Color balance
adjustment (Y)
0 to 255 128
The target color and density
area become darker as the
value increases.
2.3
05-7981 0/1/2
Color balance
adjustment (M)
0 to 255 128
The target color and density
area become darker as the
value increases.
2.3
05-7982 0/1/2
Color balance
adjustment (C)
0 to 255 128
The target color and density
area become darker as the
value increases.
2.3
05-7983 0/1/2
Color balance
adjustment (K)
0 to 255 128
The target color and density
area become darker as the
value increases.
2.3
05-7992 0/1/2
Text gamma
balance
adjustment (Y)
0 to 255 128
When a larger value is set,
fine lines and thin text
become darker. When a
smaller value is set, they
become lighter.
2.2.2
05-7993 0/1/2
Text gamma
balance
adjustment (M)
0 to 255 128
When a larger value is set,
fine lines and thin text
become darker. When a
smaller value is set, they
become lighter.
2.2.2
05-7994 0/1/2
Text gamma
balance
adjustment (C)
0 to 255 128
When a larger value is set,
fine lines and thin text
become darker. When a
smaller value is set, they
become lighter.
2.2.2
05-7995 0/1/2
Text gamma
balance
adjustment (K)
0 to 255 128
When a larger value is set,
fine lines and thin text
become darker. When a
smaller value is set, they
become lighter.
2.2.2
Color
mode
[05] Code
Sub
code
Adjustment
Acceptable
value range
Default Setting value
Reference
section