3.Printer-specific Adjustments
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC © 2018 TOSHIBA TEC CORPORATION All rights reserved
3-80
For Mac
Open the print dialog box. Enable the “Color Settings 1” - “Toner Save” option.
Caution after the adjustment
The adjustment may possibly provide the image density lower than the user desires, when printing is
performed in the toner save mode. Therefore, carefully perform the adjustment, while checking the
printouts.
Remarks
The print density in the toner save mode can also be adjusted. For further information regarding the
adjustment procedures, refer to "3.8.2 To Adjust the Image Density in the Toner Saving Mode".
Mac
To Next Page
Loading...
