3.Printer-specific Adjustments
© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
3-95
• The color to be adjusted varies according to the color (color to be used for the area other than
black) selected in the Twin-color mode. Refer to the table below and select the color to be
adjusted.
(3) Perform halftone adjustment.
For details of the adjustment procedure, refer to "3.1.11 Halftone Adjustment (when changing all
print jobs)".
Caution after the adjustment
Nothing in particular.
Selected color
Color to be adjusted
Y (Yellow) M (Magenta) C (Cyan)
Red
Green
Blue
Cyan
Magenta
Yellow
To Next Page
Loading...
