2.Copier-specific Adjustments
© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
2-9
Remarks
• Enter a value within the recommended value range mentioned in the procedures. Otherwise, it may
cause a loss in MFP performance, including degradation in the image quality and a reduction in the life
of the consumables.
• If you perform only step (9) above (changing the setting value of subcode 3 of code [08-2548]) as an
image quality adjustment for the black mode, it may cause an extra increase or decrease in the
amount of K toner used compared with that for the other colors, or it may create a difference in the
reproducibility of halftones.
To Next Page
Loading...
