2.Copier-specific Adjustments
© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
2-45
(2) Press [Image] tab on the Copy mode. Press [Sharpness].
Press [Soft] to soften the copy image.
After softening the copy image, copy and check the copy image quality.
If further image quality adjustments is necessary, go to the next step.
(3) Select [05 ADJUSTMENT MODE].Change the values for codes [7056] to [7058], [7061], [7062],
[7249], [7794] to [7806] to adjust the default value for the sharpness intensity.
• Decreasing the sharpness intensity will minimize moiré.
• The smaller the value is, the weaker the sharpness intensity becomes. The larger the setting
value is, the stronger the sharpness intensity becomes.
Changing the values for these codes will change the sharpness intensity, when the [Sharpness]
indicator in the [Image] menu is set to the center. Remember that 1 step of the indicator will
increase or decrease the sharpness intensity by “25”. If the sharpness intensity of the center value
is changed, each step of the indicator will be changed accordingly. (For instance, if the center
value is decreased by “25” (softer), the value of each step of the indicator will also be decreased
by “25” (softer).)
However, the range of adjustment values that is valid for sharpness level change is from -100 to
+100 of the total of the setting value of the [05] code and that of the indicator. For instance, if the
setting value of the [05] code is “103” (“-25” from the default value), the limit of the steps in the soft
side of the indicator is “-3”. If the step is set at “-4”, the image quality will not be changed.
Color mode Original mode [05] code
Recommended
value
Acceptable
value range
Default
Full color
Text/Photo 05-7796
Set a value smaller
than 128.
0 to 255 128
Text 05-7797
Printed Image 05-7798
Photo 05-7799
Map 05-7800
User Custom 05-7795
Red Seal Color 05-7794
Mono color
Text/Photo 05-7801
Text 05-7802
Printed Image 05-7803
Twin color
Text/Photo 05-7804
Text 05-7805
Printed Image 05-7806
Black
Text/Photo 05-7056
Text 05-7057
Photo 05-7058
User Custom 05-7249
Image Smoothing 05-7061
Drop Out Color 05-7062
To Next Page
Loading...
