Toshiba E-STUDIO3505AC - Paper Transport Path

1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 35
TROUBLESHOOTING FOR THE HARDWARE
 Paper transport path
Be careful not to let your fingers be caught between the equipment and the duplexing unit cover or automatic
duplexing unit cover.
This could injure you.
1
Open the automatic duplexing unit cover on the right.
2
Remove the misfed paper.
e-STUDIO5005AC Series / e-STUDIO5008LP Series
e-STUDIO5008A Series
 Be sure not to touch the transfer belt when removing the misfed paper. This could stain copy images.
 Do not clean roller [A] though it may be stained. It will be automatically cleaned at the next printing.
AA
2
1