Toshiba E-STUDIO3508A - Page 106

5.INSTALLING PRINTER DRIVERS FOR UNIX/Linux
106 Setting Up the UNIX/Linux Filters
6
Add a line as below in the <queue name>.conf.
dest=<IP address>
7
Save the file.
8
Enter the following command:
mkque -q<queue name> \
-a ‘s_statfilter = /usr/lib/lpd/bsdshort’ \
-a ‘up = TRUE’ -a ‘host = <IP address>’ -a ‘rq = print’
9
Enter the following command:
Color MFP:
mkquedev –q <queue name> -ddev_<queue name> \
-a 'backend = /opt/toshiba/tap/bin/estcolorBackend'
Black and White MFP:
mkquedev –q <queue name> -ddev_<queue name> \
-a 'backend = /opt/toshiba/tap/bin/estbwBackend'
10
Enter the following command:
Color MFP:
cp /usr/lib/lpd/pio/predef/net_estcolor \
/opt/toshiba/tap/filter/<queue name>
Black and White MFP:
cp /usr/lib/lpd/pio/predef/net_estbw \
/opt/toshiba/tap/filter/<queue name>
Creating a print queue manually on Linux
1
Enter the following command:
ls /opt/toshiba/tap/interface
2
If the above directory does not exist, enter the following command:
mkdir /opt/toshiba/tap/interface
3
Log on to the root account.
4
Open your UNIX/Linux editor.
5
Create the following file.
/opt/toshiba/tap/interface/<queue name>.conf
6
Add a line as below in the <queue name>.conf.
dest=<IP address>
7
Save the file.
8
Enter the following command:
Color MFP:
cp /opt/toshiba/tap/model/net_estcolor \
/opt/toshiba/tap/interface/<queue name>
Black and White MFP:
cp /opt/toshiba/tap/model/net_estbw \
/opt/toshiba/tap/interface/<queue name>
9
Enter the following command:
/opt/toshiba/tap/bin/modPrintcap \
-a <queue name> <IP address>
10
Enter the following command:
ls /opt/toshiba/tap/bin/flag_<queue name>
The file in step 10 does not exist when the operations from step 1 to 9 are correctly performed. In that case, the
operation of step 11 is not required to be performed. Skip to step 12.