INSTALLING e-Filing UTILITY (Windows)
Installing e-Filing Backup/Restore Utility 147
0.Installing e-Filing Backup/Restore Utility
Perform installation corresponding to your Windows computer.
To perform installation, you must log onto Windows with the “Administrator” account; this enables the installation
and uninstallation of client software.
If Windows Vista or later / Windows Server 2008 or later is used, you can perform the installation by temporarily
changing the user account following the procedure below.
Open the “Admin\e-FilingUtility” folder in the Install Disc, and then double-click “Setup.exe”.
When the [User Account Control] dialog box is displayed, enter an administrator password, and then click [Yes]
([OK]).
1
Insert the Install Disc into the disc drive.
When you insert the Install Disc into the disc drive, Software Installer may launch automatically. In this case, click
[Exit] to close it and continue the operation.
2
Open “Admin\e-FilingUtility” folder and double-click “setup.exe”.
3
Select your language and click [OK].
The [InstallShield Wizard] dialog box appears.
4
Click [Next].
To Next Page
Loading...
