5.INSTALLING PRINTER DRIVERS FOR UNIX/Linux
108 Setting Up the UNIX/Linux Filters
Changing the default values
You can change the default values of a print queue by the following procedure.
1
Confirm the interface file of which name is same as the print queue.
This file contains all of the default settings and values that can be set. These values are case sensitive and must
conform to the /bin/sh variable format. The interface file is saved in the following directory.
- Solaris: /etc/lp/interfaces
- HP-UX: /etc/lp/interface
- IBM AIX: /opt/toshiba/tap/filter
- Linux: /opt/toshiba/tap/interface
2
To edit the configuration file manually, add a line that include parameters and value.
The configuration file is saved in following directory.
- Solaris: /etc/lp/interfaces
- HP-UX: /etc/lp/interface
- IBM AIX: /opt/toshiba/tap/filter
- Linux: /opt/toshiba/tap/interface
For example, to change the default orientation to Landscape, add the following line:
orient= “LANDSCAPE”
Deleting the print queue
There are two ways to delete the print queue: one is deleting a print queue using estcolorrm/estbwrm, and the other
is deleting a print queue manually without using estcolorrm/estbwrm.
P.108 “Deleting a print queue using estcolorrm/estbwrm”
P.109 “Deleting a Print Queue Manually”
Deleting a print queue using estcolorrm/estbwrm
When you want to delete the queue using estcolorrm/estbwrm, perform the following procedure.
1
Log on to the root account.
2
Enter the following command:
Color MFP:
estcolorrm <queue name>
Black and White MFP:
estbwrm <queue name>
This command uses the system’s lpadmin command to delete the print queue and configuration file.
Restart the lpd under Linux.
To Next Page
Loading...
