Toshiba E-STUDIO3508A - Destination Setting

3.OPERATING WITH A CLIENT COMPUTER
70 Managing Documents
 Destination setting
On the Recipient List page, you can specify destinations to send e-Filing documents as Email.
You can specify the recipients by entering the Email addresses manually, selecting the recipients from an address
book, selecting the recipient groups from an address book, or searching the LDAP server for recipients.
On the Recipient List page, you can specify up to 400 destinations.
If [LDAP Authentication] is selected in [Authentication Type], you can choose only destinations that are registered in
the authenticated LDAP servers. For details of the LDAP Authentication option, refer to the TopAccess Guide.
 P.70 “Entering recipients manually”
 P.71 “Selecting recipients from an address book”
 P.72 “Selecting groups from an address book”
 P.73 “Searching the LDAP server for recipients”
 P.74 “Removing contacts from the recipient list”
Entering recipients manually
Follow the steps below to manually add a recipient to the Recipient List.
1
Click [Destination Setting] to open the Recipient List page.
2
Click [New].
The Contact Property page is displayed.
3
Enter the Email address of the recipient and click [OK].
The entered recipient is added to the Recipient List page.
4
Repeat steps 2 and 3 to add all the recipients as required.
You can remove contacts once added to the recipient list before saving the destination settings.
 P.74 “Removing contacts from the recipient list”
5
Click [Save].
The contacts are added as the destinations.