Managing Address Book 73
2
Click [Start Discovery] to begin the process.
y It locates all the compatible devices in your network.
y You can quit the process by clicking [Stop Discovery].
y If the process continues for a long time, it is because the too many network clients are
in the network. In this case, you can configure the discovery settings from
[Advanced] button.
P.74 “Configuring Discovery Settings”
3
When the process completes, found printers are listed in the list.
4
Select the device that you want to access from the list and click
[OK].
y The Address Book Viewer connects to selected device and obtains the address book
data in the Public Address Book.
To Next Page
Loading...
