Toshiba e-STUDIO353 - Page 121

5
e-STUDIO350/352/353/450/452/453
CONTROL PANEL
5 - 13 © 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
(6) Remove 3 screws and take off the cover.
Fig. 5-505
Cover
(7) Remove 5 screws and take off the hinge
bracket.
(8) Disconnect 5 connectors.
(9) Release the harness from 2 harness clamps.
(10) Remove 1 screw and take off the DSP
board.
(11) Remove 4 screws and take off the LCD.
Fig. 5-506
Fig. 5-507
Fig. 5-508
Hinge bracket
DSP board
LCD
05/11