Toshiba e-STUDIO353 - Page 196

9 - 30
9
e-STUDIO350/352/353/450/452/453
PAPER FEEDING SYSTEM
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
(4) Loosen 1 setscrew and take off the drawer
feed clutch.
Fig. 9-477
Fig. 9-476
(3) Remove 2 screws and take off the clutch
bracket and bush.
Notes:
Match the protruding portion of clutch with
the position shown in the drawing for as-
sembling.
Fig. 9-478
Notes:
Attach the clutch to the shaft referring to the
gureatright.
Bush
Clutch bracket
Drawer feed clutch
Setscrew
0.2-0.5mm