2 - 57
2
e-STUDIO350/352/353/450/452/453
OUTLINE OF THE MACHINE
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 2-665
(6) Remove 1 screw.
(7) Lift up the offset tray and release the hook.
Take off the offset tray toward the front.
[K] MR-3018 (Reversing Automatic Document
Feeder (RADF))
(1) Turn the power OFF and unplug the power
cable.
(2) Take off the connector cover.
Fig. 2-666
05/11
Fig. 2-667
(3) Disconnect the connector.
Fig. 2-668
(4) Remove 1 screw and 1 washer on the rear
side.
To Next Page
Loading...
