Toshiba e-STUDIO353 - Page 79

2 - 59
2
e-STUDIO350/352/353/450/452/453
OUTLINE OF THE MACHINE
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 2-673
Fig. 2-674
[L] MJ-1101 (Console nisher)
(1) Turn the power OFF and unplug the power
cable.
(2) Take off the connector cover and disconnect
1 connector.
(3) Openthefrontcoverofthenisher.Remove
1 screw and slide the lever to the front side.
05/11
Fig. 2-675
(4) Takeoffthenisher.
Note:
Whenmovingthenisherunitbyitself,be
careful that it does not topple over.
Fig. 2-676
[M] MJ-6101(Hole punch unit)
(1) Turn the power off and unplug the power
cable.
(2) Take off the connector cover and disconnect
the connector.