About Scan Features 15
Scan to File Mode
Scan to File mode allows users to save scanned images as PDF, XPS, TIFF, or JPEG
*1
files
either the shared folder in the equipment, or network folder in another computer. Users can use
saved files by copying them from the folder where users save the scanned images.
In the shared folder in the equipment, up t 4 GB (10GB
*2
) of data can be stored. The available
size is displayed in the Device tab page in TopAccess.
*1 It is applicable only for e-STUDIO520/600/720/850, e-STUDIO523/603/723/853 and e-STUDIO281c/
351c/451c.
*2 It is applicable only for e-STUDIO281c/351c/451c.
Delete the files in the shared folder when they are no longer needed.
For instructions on how to perform Scan to File, see the following section.
P.39 “Scan to File”
The Copy & File function, which enables users to copy and store as file at the same time, also
will be available. For instruction on how to perform Copy & File, see the following section.
P.89 “Copy & File”
Scan to File
Windows computer
or
Mac OS X 10.2.4
or later
Copying Files from the shared
folder in the equipment
Copying Files from the
network folder
Shared FolderShared Folder
Network FolderNetwork Folder
To Next Page
Loading...
