2 Scan to e-Filing
36 How to Perform Scan to e-Filing
14
Press the [SCAN!] button.
You can also set another scan agent, by pressing either the [SCAN TO FILE] button or
[SCAN TO E-MAIL] button to set the scanning conditions.
15
If the “To continue, place document on glass. And press Scan!”
message is displayed, place another original on glass and press
[SCAN!] to scan another original, or press the [JOB FINISH] button
to finish scanning.
y When the original is set on the Automatic Document Feeder , this screen is not dis-
played. However, this screen is displayed when you press the [CONTINUE] button
during scanning the originals.
y If you want to cancel the storage of the scanned data, press the [JOB CANCEL] but-
ton.
y You can change the setting of the original type and scanning conditions, using the
[EDIT] button before pressing the [SCAN!] button.
The "xxxxxx" message is displayed if more than 20 jobs is stored in the e-Filing. If such is
the case, wait until the job is stored in the next e-Filing box or delete a job by pressing
[xxxxx] button.
To Next Page
Loading...
