How to Perform Scan to E-mail 65
y Before pressing the [SETTINGS] button, you can specify other E-mail addresses as
you require.
y You can confirm or remove the E-mail addresses that you specified in the DESTINA-
TION screen which can be displayed by pressing the [DESTINATION] button.
P.71 “Confirming or removing E-mail addresses from destination”
Searching with search strings from LDAP server
To search contacts in the LDAP server, the directory service must be registered using TopAc-
cess by the network administrator.
1
Press the [SEARCH ADDRESS] button.
y The ADDRESS SEARCH screen is displayed.
2
Press the [DIR SERVICE] button.
y The Directory Search Name screen is displayed.
When the [DIR SERVICE] button is displayed as a selected button, this equipment is cur-
rently configured to search a default directory service.
To Next Page
Loading...
