Scanning Using Template 77
y If you want to cancel the storage of the scanned data, press the [JOB CANCEL] but-
ton.
y You can change the setting of the original type and scanning conditions, using the
[EDIT] button before pressing the [SCAN!] button.
Using Scan to E-mail template when User Authentication for Scan to E-mail
is enabled
When the User Authentication for Scan to E-mail is enabled, operate the following procedure to
use the template that is registered the Scan to E-mail agent.
1
Place the original(s).
y For instruction about placing the originals, see Operator’s Manual for Basic Func-
tions.
2
Press the [SCAN] button on the control panel to enter the scan
menu.
y The basic scan menu is displayed.
3
Press the [SCAN TO E-MAIL] button.
y The AUTHENTICATION screen is displayed.
To Next Page
Loading...
