Toshiba E-studio5540c - Page 177

5.INSTALLING PRINTER DRIVERS FOR UNIX/Linux
Setting Up the UNIX/Linux Filters 175
5 INSTALLING PRINTER DRIVERS FOR UNIX/Linux
10
Enter the following command:
enable <queue name>
 Changing the default values
You can change the default values of a print queue by the following procedure.
1
Confirm the interface file of which name is same as the print queue.
 This file contains all of the default settings and values that can be set. These values are case
sensitive and must conform to the /bin/sh variable format. The interface file is saved in the following
directory.
- Solaris: /etc/lp/interfaces
- HP-UX: /etc/lp/interface
- IBM AIX: /opt/toshiba/tap/filter
- Linux: /opt/toshiba/tap/interface
- Open UNIX: /usr/spool/lp/admins/lp/interfaces
2
To edit the configuration file manually, add a line that include parameters and value.
 The configuration file is saved in following directory.
- Solaris: /etc/lp/interfaces
- HP-UX: /etc/lp/interface
- IBM AIX: /opt/toshiba/tap/filter
- Linux: /opt/toshiba/tap/interface
- Open UNIX: /usr/spool/lp/admins/lp/interfaces
 For example, to change the default orientation to Landscape, add the following line:
orient= “LANDSCAPE”