Toshiba E-STUDIO6506AC - Page 169

e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
3-33
3. Printer-specific Adjustments

Procedures
* Both the service technician and the user can perform all adjustments.
(1) Change the “Contrast” option on the printer driver.
• Select the desired value for contrast on a scale of -4 (Lowest) to 4 (Highest).
For Windows
.
Open the property page of the printer driver. Click [Setting] in the “Image Quality” tab.
Change the “Contrast” option in the “Image Attribute” tab.
PCL6
PS3
XPS