Toshiba E-STUDIO6506AC - To Improve the Reproducibility of Red Seal Color

e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
3-140
3. Printer-specific Adjustments
3.26 To Improve the Reproducibility of Red Seal Color
Before
After

Explanation
When an original containing a red seal is printed, users can select the Red Seal Color Mode as the original mode.
Use this mode if the reproducibility of red seal color printed under the default settings is insufficient.

Procedures
(1) Select [08 SETTING MODE]. Change the value for code [8005] to “1”.
(2) Select the “Red Seal Color Mode” check box on the printer driver.
For Windows
* This adjustment will only have an effect on Auto or Color mode printing.
Open the property page of the printer driver. Select “General” in the “Original Image Quality Type” box in
the “Image Quality” tab, and then click [Setting].
Mark the “Red Seal Color Mode” checkbox in the “Basic” tab.
PCL6
PS3
XPS