e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
3-91
3. Printer-specific Adjustments
For Macintosh
Open the print dialog box. Enable the "Print Mode" - "Do not Print Blank Pages" option.
Caution after the adjustment
The adjustment may not possibly operate the following options as programmed. Therefore, pay special attention
to the combination of options.
• Booklet printing • N-up printing • Use Front Cover
• Use Back Cover • Interleave Pages
Remarks
If any data are inserted in the header or footer of a particular page on Excel or Word, even though no data are
present in the body, the page will not be recognized as a blank page. The header or footer will be printed out.
To Next Page
Loading...
