Toshiba E-STUDIO6506AC - Page 281

e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
3-145
3. Printer-specific Adjustments
Enter [05 ADJUSTMENT MODE] and change the setting values for the codes from [8121] to [8126] to adjust
smudged black text and black thin lines.
Resolution Color PDL
[05]
Code
Recommend
ed value
Acceptable
value
range
Default
600dpi
Color
PS
8121
When a larger
value than the
default one is
set, black text
or black thin
lines are thinly
printed.
0 to 9
2
PCL
8122
5
XPS
8123
5
Twin
Color
PS
8124
2
PCL
8125
5
XPS
8126
5
To adjust the image quality in black-and-white printing
("Black and White" is selected from among the "Color" options on the PCL6 or PS3 or XPS printer driver.
Or "Mono" is selected from among the "Color Type" options on Macintosh.)
* The "Color" options are available in the "Basic" tab on the PCL6, PS3 and XPS printer drivers. The "Color
Type" options are available in the "Color Settings 1" menu in the print dialog box on Macintosh.
Enter [05 ADJUSTMENT MODE] and change the setting values for the codes from [7325] to [7327] or
[7305] to adjust smudged black text and black thin lines.
Resolution Color PDL
[05]
Code
Recommende
d value
Acceptab
le value
range
Default
600dpi Black
PS 7325
When a larger
value than the
default one is
set, black text or
black thin lines
are thinly
printed.
0 to 9
2
PCL 7326 5
XPS 7327 5
1200dpi Black PS 7305 6

Caution after the adjustment
Perform the adjustment while checking the printed images since faint black text or black thin lines may occur.