2 SETTING ITEMS (ADMIN)
126 Setting General Functions
7
Touch the center of the + mark with a stylus, referring to the message displayed on the
touch panel.
When the panel calibration operation is completed, the GENERAL menu (2/2) will be displayed.
While the panel calibration operation is being performed, no other operations on the touch panel can be
performed. If you open the front cover of the equipment during the panel calibration operation and instructions
to replace toner cartridges are displayed, close the front cover, and complete the panel calibration operation,
and then replace toner cartridges.
To Next Page
Loading...
Need help?
General
