2.SETTING ITEMS (ADMIN)
Setting General Functions 93
2 SETTING ITEMS (ADMIN)
Setting the calibration and registration display level
You can set whether this equipment will use the calibration and registration settings that are operated by a user or
administrator.
Each button ([CALIBRATION], [REGISTRATION]) appears under the USER menu or ADMIN menu according to this
option.
1
Press [GENERAL] in the Admin menu (1/2).
The GENERAL menu (1/2) is displayed.
To display the ADMIN menu, see the following page:
P.75 “Entering Admin Menu”
2
Press [DISPLAY LEVEL].
The DISPLAY LEVEL screen is displayed.
3
Press [USER] or [ADMIN] for each option and press [OK].
The Display Level setting is completed.
To Next Page
Loading...
Need help?
General
