2 SETTING ITEMS (ADMIN)
168 Setting Copy Functions
4
Specify the following items as required, and press [OK].
AUTO EXIT TRAY CHANGE (CASCADE PRINT) — Selecting [ON] for this function allows the equipment to
automatically change the output tray and continue printing when the one specified becomes full. When [OFF] is
selected, the equipment will stop printing.
WASTE HOLE PUNCH TRAY FULL — Selecting [ON] for this function allows the equipment to continue printing
without hole punches even when the punch dust box in the Hole Punch Unit (optional) becomes full. When [OFF] is
selected, the equipment will stop printing.
ORIGINAL OUTSIDE ERASE — Selecting [ON] enables you to use this function by default.
To Next Page
Loading...
Need help?
General
