2.SETTING ITEMS (ADMIN)
IEEE 802.1X Authentication Setting 207
2 SETTING ITEMS (ADMIN)
Setting PEAP
y The CA certificate must be installed in this equipment before the settings for IEEE 802.1X authentication are
performed. For instructions on how to install the certificate, refer to the TopAccess Guide “Chapter 8:
[Administration] Tab Page”.
y PEAP is not available for Windows Server 2008.
1
Select [PEAP] and press [Next].
The WIRED 802.1X SETTINGS (PEAP) screen is displayed.
2
Select [EAP-MSCHAPv2] for the inner authentication method and press [Next].
The WIRED 802.1X SETTINGS (EAP-MSCHAPv2) screen is displayed.
To Next Page
Loading...
Need help?
General
