2 SETTING ITEMS (ADMIN)
84 Setting General Functions
4
Set new password and complete the setting.
1) Press [NEW PASSWORD] to enter new password.
2) Press [RETYPE NEW PASSWORD] to enter the new password again.
3) Press [OK].
When you press [NEW PASSWORD] and [RETYPE NEW PASSWORD], the on-screen keyboard is displayed.
Enter the value using the on-screen keyboard and press [OK] to set the entry. You can also use the digital keys
on the control panel to enter numerals.
Specify the 6 to 64-digit administrator’s password. You can use alphanumerics and the following symbols.
! # $ ( ) * + , - . / : ; = ? @ \ ^ _ ` { | } ~
Resetting the service password
1
Press [RESET SERVICE PASSWORD].
The message “Are you sure?” is displayed in the ATTENTION screen.
2
Press [YES] to reset the service password.
Press [NO] to cancel the operation.
To Next Page
Loading...
Need help?
General
