Toshiba E-STUDIO850 - Page 39

March 2005 © TOSHIBA TEC e-STUDIO520/600/720/850 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 15
2
2) RFC related error (when GM-1050/4010 or 2040 is installed)
Error code
Message displayed in the
TopAccess screen
Contents Troubleshooting
2500 Syntax error, command unrecog-
nized
HOST NAME error (RFC: 500)
Destination mail address error
(RFC: 500)
Terminal mail address error
(RFC: 500)
Ch.5.1.14 [ 2 ]
2501 Syntax error in parameters or
arguments
HOST NAME error (RFC: 501)
Destination mail address error
(RFC: 501)
Terminal mail address error
(RFC: 501)
Ch.5.1.14 [ 2 ]
2503 Bad sequence of commands Destination mail address error
(RFC: 503)
Ch.5.1.14 [ 2 ]
2504 Command parameter not imple-
mented
HOST NAME error (RFC: 504) Ch.5.1.14 [ 2 ]
2550 Mailbox unavailable Destination mail address error
(RFC: 550)
Ch.5.1.14 [ 2 ]
2551 User not local Destination mail address error
(RFC: 551)
Ch.5.1.14 [ 2 ]
2552 Insufficient system storage Terminal/Destination mail address error
(RFC: 552)
Ch.5.1.14 [ 2 ]
2553 Mailbox name not allowed Destination mail address error
(RFC: 553)
Ch.5.1.14 [ 2 ]