e-STUDIO520/600/720/850 FIRMWARE UPDATING March 2005 © TOSHIBA TEC
6 - 24
<Updating Scanner ROM>
(1) Install the ROM to the download jig.
Make sure the direction is correct ( P.6-3 "Fig.6-2 Jig board: K-PWA-DLM-320").
(2) Shut down the equipment.
(3) Take off the top right cover.
Fig.6-21
(4) Take off the right upper cover.
Fig.6-22
Top right cover
Right upper cover
To Next Page
Loading...
