Toshiba ESTIA HWS-455XWHM3-E - Page 48

–47–
Hydro Unit
Installation Manual
 FC for Hydro Unit (FC for Remote controller)
• Hydro unit function code setting is available only for the header remote controller.
• Set function codes for various operation modes with the remote controller.
(1) Press the [
] / [ ] button to select “FC for Hydro unit” (or “FC for Remote controller”) on the FIELD
SETTING screen, then press the [
] button.
(2) Press the [
] / [ ] button to select FC number or Data, then press the [ ] / [ ] button to set the
value.
(3) Press the [ ] button. The set value is registered.
FIELD SETTING MENU(2/2)
FC for Hydro unit
FC for Remote controller
SET
FIELD SETTING MENU(2/2)
FC for Hydro unit
FC for Remote controller
SET
or
or
FC for Remote controller
FC No. Data
FIX
0000
FC for Hydro unit
FC No. Data
FIX
0001
47-EN