143
14. Failure History Calling Function
• List of latest 10 alarm data: error information of error code, date and time is displayed.
<Procedure>
To reset the alarm history
If the current failure is the same as the one occurred last time before deleted, the history may not record the current
failure.
1 Press the [ ] button and the [ ] button at same time for 4
seconds or longer on the top screen to display the “FIELD SETTING
MENU”.
2 Press the [ ] / [ ] button to select “Alarm history” on the
FIELD SETTING MENU screen, then press the [ ] button.
1 Press the [ ] button to reset the alarm history.
2 Press the [ ] button, then all alarm data is cleared.
Test mode
FIELD SETTING MENU(1/2)
Floor drying
Forced defrosting
Information input
Alarm history
SET
Alarm history(1/3)
RESET
Code Date Time
Alarm history
NOYES
Reset all alarm data?
To Next Page
Loading...
